User`s manual

Getting Started 59
cPCI-3920
4.3 Installing the Hard Disk Drive (cPCI-3290B only)
The cPCI-3920B supports a slim-type 2.5” SATA HDD. If the cPCI-
3920 comes with a pre-installed HDD, proceed to the next section.
To install the hard disk drive:
1. Place the HDD into the bracket as shown.
2. Insert the the HDD into the CN3-2 SATA signal/power connector.
3. Tighten all four bracket screws to secure the HDD in place.
CN3-2