User`s manual

30 Functional Description

CompactPCI Bus Interfaces

The complete CompactPCI connector configuration comprises two

connectors named J1 and J2. Their function is as follows:

X J1: 32-bit CompactPCI interface with PCI bus signals, arbi-

tration, clock and power

X J2: has optional Rear I/O interface functionality or 64-bit ter-

mination

The board is capable of driving up to seven CompactPCI slots,

with individual arbitration and clock signals. The CT-30 is not

hot-swappable but supports the addition or removal of other

boards whilst in a powered-up state.

The CT-30 is designed for a CompactPCI bus architecture. The

CompactPCI standard is electrically identical to the PCI local bus.

However, these systems are enhanced to operate in rugged indus-

trial environments and to support multiple slots.

CompactPCI Connectors J1/J2

NOTE:

Pin rows F and Z are GND pins.