WF29006 ASSEMBLY INSTRUCTIONS 39” BLACK METAL GARDEN FENCE ASSEMBLY INSTRUCTIONS WF29006 (5 PACK WITH STAKES) 30 MIN Approximate assembly time Want to see a video on how to assemble this product? Scan the QR code WWW.ZIPPITY-OUTDOOR.COM WWW.ZIPPITY-OUTDOOR.COM 1 VER.
WF29006 ASSEMBLY INSTRUCTIONS GENERAL INFORMATION IMPORTANT k Check the inside of the larger pieces in your box for other materials packed inside. k When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching. k We recommend an area approximately 5’x 8’ for unobstructed assembling. k You should not need to use excessive force when assembling components.
WF29006 ASSEMBLY INSTRUCTIONS 36.2 in 2.9 in 2.8 in 39.2 in 8.4 in WWW.ZIPPITY-OUTDOOR.
WF29006 ASSEMBLY INSTRUCTIONS STEP 1: LAY OUT MATERIALS A B Fence Panel (5) 39"H x 36"W 4 Metal Stake (6) ½" Diameter x 48" L WWW.ZIPPITY-OUTDOOR.
WF29006 ASSEMBLY INSTRUCTIONS STEP 2: INSTALL FENCE PANEL STEP 2.1 GOOD B BETTER A Insert a Metal Stake (B) through the loops on the Fence Panel (A), and use a rubber mallet to drive the metal stake into the ground until it meets the top loop. Alternatively, use a hammer with a block of wood to protect the top of the metal stake. STEP 2.2 Line up the remaining fence panels as shown, and drive a metal stake through the loops of both fence panels. WWW.ZIPPITY-OUTDOOR.
WF29006 ASSEMBLY INSTRUCTIONS 6935 Reames Rd. Ste. K. Charlotte, NC 28216 support@zippity-outdoor.com 704-892-5222 877-234-6196 WWW.ZIPPITY-OUTDOOR.COM 6 WWW.ZIPPITY-OUTDOOR.
