Instructions / Assembly

WWW.ZIPPITY-OUTDOOR.COM
8
ASSEMBLY INSTRUCTIONS
ZP19049
STEP 5: ASSEMBLE THE GATE WINGS
STEP 5.1
STEP 5.2
(C) and
. Orient the Posts
(F) as shown. Slide (2) posts down into the

pre-drilled holes on the posts and the rails

steel screws into the holes.
Insert a picket (numbered 1)
down through the horizontal
top rail and into the horizontal

the second gate wing.
Horizontal boom rail
has no picket hole on the
underside of the rail.
Tabs
Align
holes
Note the direcon of the stakes.
C
D
F