Instructions / Assembly

WWW.ZIPPITY-OUTDOOR.COM
7
ASSEMBLY INSTRUCTIONS
ZP19049
STEP 4: INSTALL HINGE AND LATCH
STEP 4.1
Align the Hinges (K) on

rails as shown. Pre-drill
two holes on the face
of each rail. The holes

from the edge of the
gate rails. Fasten each

Self-Drilling Stainless
Steel Screws (N).
Align the Latch Finger (J) to the top gate rail and
pre-drill four holes into the gate rail as shown. Fasten


K
N
STEP 4.2
¼”
J