Instructions / Assembly

WWW.ZIPPITY-OUTDOOR.COM
5
ASSEMBLY INSTRUCTIONS
ZP19049
STEP 2: ASSEMBLE THE GATE FRAME
STEP 2.1
(H)(I) 
(B) onto the ends of the gate rails.
Gate boom rail has no picket holes on the underside of the rail.
A screw is not needed
here. This is where the
latch will be installed.
Tabs
Align holes
Slide (2) Gate Posts (E)
down into the top and

post tabs at the top. Align
the pre-drilled holes in the
gate posts with the top

the gate posts to the top

Self-Drilling Stainless Steel
Screws (M).

(L) against
a gate rail and gate post as shown

stainless steel screws into the gate

stainless steel screws into the gate
post. Repeat this process for the
other three internal corners.
H
B
I
E
STEP 2.2
STEP 2.3
M
L