Installation Guide

5
Baskenridge Vinyl Gate Kit w/ Fence Wings Instructions
STEP TWO
Post Caps, Hinges, and Latch Installation
W
Pressure t the two caps down over the posts. The post caps
will lock into place.
Align the hinges on the top and bottom horizontal rails as
shown.
Pre-drill two holes on the face of the horizontal rails for each
hinge as shown. Holes should be approximately ¼” from the
edge of the rail as shown.
Fasten each hinge with two black screws.
Align the nger latch to the top horizontal rail and pre-drill
four holes into the rail as shown.
Fasten four black screws to lock the nger latch in place.
1
2
3
4
5
1
6
5
3
6
4
1/4 in