Installation Guide

Assemble the Gate Frame
Orientate the gate posts so the tab is facing up as illustrated.
Insert the post down through one of the gate horizontal rails
as illustrated.
Note: the routed holes for the spindles should be facing down.
Align the pre-drilled holes in the horizontal rail with the pre-
drilled holes in the vertical posts and fasten together with
a total of four 3/4” screws.
Insert spindles into the routed holes in the horizontal rail until
they all click into place.
1
2
STEP ONE
1
3
3
Baskenridge Vinyl Gate Kit w/ Fence Wings Instructions
Note: Routed holes for
spindles should be
facing down.
Tab

2
Align
3