Installation Guide

5
Madison Vinyl Gate Kit w/ Fence Wings Instructions
STEP THREE
Hinges and Latch Installation
W
Align the hinges on the top and bottom horizontal rails as
shown.
Pre-drill two holes on the face of the horizontal rails for each
hinge as shown. Holes should be approximately 1/4” from the
edge of the rail as shown.
Fasten each hinge with two screws.
1
2
3
2
3
1
Align the finger latch to the top horizontal rail and pre-drill
four holes into the rail as shown.
Fasten four screws to lock the finger latch in place.
4
5
54
¼in