Installation Guide

x
x
x
x
STEP THREE
4
1
Install fence into Ground
Move the fence to its final location and identify the location
of posts.
Attempt to push the unit into the ground as illustrated
Optionally, if your ground is too hard:
2
2
x
x
1
1. Loosen the top 8” of the ground using a claw hammer and
screw driver (or something equivalent) as illustrated.
2. Add water to loosen soil.
3. Use a block of wood to the protect the top of post and
gently hammer each post into the ground equally.
4. See next page.
Push down on the top of posts
with both hands
Option 1:
Option 3:
Option 2:
Block of Wood
x
x
Manchester Vinyl Picket Fence Instructions