Installation Guide

3
STEP TWO
Premium Vinyl Privacy Screen
Repeat step 1 through 3 for the second panel as shown.
With a helper move the entire unit to intended position.
Insert the ground stake with the blade down as illustrated
into the groove of the post.
Using a piece of wood and hammer as illustrated, gently
tap the stake approximately 12” into the ground.
Tip: If your ground is hard, use your claw hammer to
loosen the soil as illustrated and add water
1
2
3
1
4
4
3
Tip: If your ground is hard,
use your claw hammer to loosen
the soil as illustrated and add
water.
DO-IT-YOURSELF
FRIENDLY PRODUCTS
Zippity