Instructions / Assembly

WWW.ZIPPITY-OUTDOOR.COM
19
ASSEMBLY INSTRUCTIONS
ZP19009
1. Fasten (1) 1
stainless steel screw through the
pre-drilled hole on both ends of the
Shade Slat (H).
2. Place the screws in the shade
slat on the top of the beams and
fasten them into the pre-drilled
holes on top of the beams.
3. Repeat this process with the
remaining shade slats.
Preview
Preview
STEP 12:  SHADE SLATS
STEP 12.1
1. Mark where the
latch bolt meets the
post on post C.
2. 

receive the latch bolt.
STEP 11.3
H
Drive screw
here
1
2
3
1
2