Instructions / Assembly

WWW.ZIPPITY-OUTDOOR.COM
14
ASSEMBLY INSTRUCTIONS
ZP19009
STEP 8: SQUARE AND SECURE POSTS
STEP 8.1
STEP 8.2a STEP 8.2b
Visually square the unit in the space where you plan to install your shower. The
diagonal distance between your posts must be equal for your unit to be square.
Note: X and Y measurements must be equal for unit to be square
X
Y
A hammer drill will be
needed for this step.
Surface Mount Install:
1. 
mounts.
2. 
(not included) to secure the surface
mounts or similar size lag screw if

Post Extension Install:
1. 


2. 
the holes with concrete (not included).
Use support blocks to support the unit
while the concrete cures.
Note: If your concrete is
not level, insert galvanized
steel washers under the
lower side of the surface
mount unl it is level.
Next, secure the surface
mounts with wedge
anchors.