Instructions / Assembly

WWW.ZIPPITY-OUTDOOR.COM
13
ASSEMBLY INSTRUCTIONS
ZP19009
STEP 7.2
STEP 7.3
1. Slide the Beams (J) into the routed holes in the posts.
2. Ensure that there is equal length of beam on each side of the shower.
3. 
1. Apply a small amount of Vinyl Glue (Q) to the inside rim of
(F).
2. 
3. (E) over the post.
Preview
Preview
J
E
Q
F
1
2
3
=
=
N
1
2
3