Installation Guide

STEP THREE
Install Fence Panel
Install one vinyl bracket on the vinyl post that has been
secured to the pipe using 3/4” screws (approximately 2”
off the ground)
Slide second bracket over the opposite end of the bottom
rail and slide the rail down into the pre-installed bracket on
the opposing side.
Use a level on the top of the bottom rail to determine
height of opposing bracket and mark for installation.
1
5
Newport Vinyl Picket Fence Instructions
2
3
2 in
1
3
2
Note: Adjust this post by sliding
left or right to fit the rail length.
DO-IT-YOURSELF
FRIENDLY PRODUCTS
Zippity