Instructions / Assembly
WWW.ZIPPITY-OUTDOOR.COM
8
ASSEMBLY
INSTRUCTIONS
ZP19002
1.
out of the post.
2. Remove the vinyl burrs from the post and screw.
3. Slowly drive the screw with force into the pipe anchor.
1. Use a level to straighten the post.
2. Drive a second hex head tek screw into the top of the post using
Adjust unl level.
3
Step 4 is only to be completed if you are concerned that
someone may pull your fence posts out of the ground.
STEP 4
SECURE POST TO PIPE ANCHOR
1 2 3
1 2
Top View
STEP 4.2
STEP 4.1