Operating instructions

TROUBLE SHOOTING
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at Seite 67
RASENMÄHER-ROBOTER / ROBOT LAWN MOWER ZI-RMR 2600e 67
Mower stops working
and is beeping.
• Mower is tilted over
than 30 degrees from
the ground.
• Turn off the mower and
take the mower to level
ground. Then restart the
mower
Bad mowing result
 Grass is extremely
overgrown or very wet
 Terrain needs
landscaping repairs
• Cut the grass
appropriate height.
• Fill in all holes, cover or
exclude all exposed roots
in order to smooth the
terrain.
Mower does not
complete the edge
Obstacle along the
path
• Obstacle along the path.
• Watch the full operation
of follow virtual wire
walking and confirm no
obstacle is present.
The robot is very noisy
• Damaged cutting blades
• Cutting blade flooded by
residues (tapes, ropes,
plastic fragments, etc.)
• Replace the blade with a
new one.
• Stop the robot in safety
conditions; remove the
fold cause from the
blade.
Mower does not detect
the charging station
contacts
• The ground before the
charging station is not
flat.
• Reset the charging
station in a flat place
Mower reached the
charging station when
its contacts are above
the charging station
contacts
• Height difference
between the charging
station and the lawn
surface at the entrance
to the charging station.
• Confirm the ground
before the charging
station is levelled with
the charging station if
necessary fill area with
dirt and level off.
The batteries can not
recharged
 Power nearing natural
end of life.
• Check the power supply
of charging station
• Change the batteries
Remote control does
not work
• The electricity power is
low
• Change batteries
Unknown trouble
• Unknown
• Turn off all switches and
restart the mower