Operating instructions

OPERATION
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at Seite 59
RASENMÄHER-ROBOTER / ROBOT LAWN MOWER ZI-RMR 2600e 59
13.7.2 Setting system time
1. Select TIME and enter it by pressing key
2. Select SYSTEM TIME and enter it by pressing key
3. To set Year.
 Press key or key to scroll to Year setting.
Press key to enter Year setting.
 Press key or key to scroll to the correct
Year and confirm the setting by pressing key .
4. Set Week, Month/Date, Hour/Minute as Step 3.
5. Press key or key to scroll to SAVE and save the setting by pressing key .
13.7.3 Setting schedule time
NOTE
The schedule time setting should be used together with AREA function.
1. Select TIME and enter it by pressing key
2. Select SCHEDULE TIME and enter it by pressing key .
3. Select WEEK (MON, TUE, WED, THU, FRI, SAT, SUN) and
enter it by pressing key .
4. To set START TIME
 Select START TIME and enter it by pressing
key
 Press key or key to set hour/minute. Confirm the settings by pressing key
5. To set working time in each area.
 Select AREA 1 and enter it by pressing key .
 Press key or key to to set how long should the robot works in AREA 1, and
confirm the settings by pressing key . 10minutes for each scrolling.(From 000 to
250minutes).
6. Set AREA 2 and AREA 3 as Step5.
Explanation:
 If Set AREA 1 with 000 minute, it means Non-cutting
in AREA 1.
 If user does not select working in AREA 2. Even user
has set a working time in AREA 3, robot will not work
in AREA 3.
7. Press key or key to scroll to SAVE and save the
settings by pressing key .
8. Select DEL to delete the settings.
NOTE
By using SCHEDULE function, the LINE must be turn on or the robot must be
put onto virtual wire. Otherwise, the robot do not works under schedule time
setting.