Operating instructions
OPERATION
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at Seite 57
RASENMÄHER-ROBOTER / ROBOT LAWN MOWER ZI-RMR 2600e 57
13.5 Stopping the mower
Press power button from remote control. Mower stops, the blade motor stops. Mower goes in
standby.
Press emergency switch directly.
Turn off the mower by the power switch.
13.6 Recharging
The mower could goes back to recharging automatically if it is powerless. On the other hand
press the HOME button from remote control or control panel, the mower also could goes back
to station for recharge.
NOTICE
• Charge the battery fully at the end of the season before winter
storage
• The interval of this charge should be reduced to 50% by each
10℃ rise in temperature above 25℃. The self-discharger state,
their capacity may not recover ever after charge. If the batteries
are stored for more than a year at room temperature. The life of
batteries may be shortened.
• Store the batteries starting from fully charged state to prevent
the life of the batteries being shortened.
• Use the batteries as quickly as possible after receiving them as
they gradually deteriorate even under proper storage
conditions.
• All the buttons (except the emergency switch and power
button) are locked which can not be used during the robot is in
recharging.
Recharge Voltage: 29.4V; Recharge current: 4A
When the display shows picture to the right, the
robot is going to find virtual wire and follow it back
to station for recharge.
The display is showing picture to the right, it is in
recharging.
The mower reverses several centimeters and stop
there with entering standby mode after fully
recharged.
Notice for charging station
Red LED lights: battery is charging.
Green LED lights up: charging completed