Operating instructions

OPERATION
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at Seite 56
RASENMÄHER-ROBOTER / ROBOT LAWN MOWER ZI-RMR 2600e 56
13.3 Configuring the mower
 Turn on the power button under the clamshell
 Clockwise rotate the EMERGENCY switch on control panel to turn on the robot
 Input Password (Initial password: 0000), the robot enters on standby mode
 Take the mower near the charging station
 Turn on the charging station
 Press the button on the charging station until the indicator light is blinking. Then release the
button.
 It finished matching with the mower while the indicator light stop blinking
 Set Address (01-60) to match with charging station firstly, otherwise, the robot cannot be
started
13.4 Selecting mow mode
13.4.1 Manual
 Push the MANUAL-button
 Robot lawn mower can now only be controlled with the remote control
13.4.2 Automatic
 Select AUTO-mode
 The robot lawn mower mows automatically within the area which is marked with the virtual
wire
The automatic mow mode can be cancelled any time by pushing the on-off button.
AC H TU N G
The robot lawn mower cannot be on:
 by powerless charging station
 by no connection with the charging station
 by cutting off virtual wire (the lamp lights up red)