Operating instructions

OPERATION
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at Seite 55
RASENMÄHER-ROBOTER / ROBOT LAWN MOWER ZI-RMR 2600e 55
13 OPERATION
Device to be operated in a perfect state only. Inspect the device visually every time it is to be used.
Check in particular the safety equipment, electrical controls, electric cables and screwed connection
for damage and if tightened properly. Replace any damaged parts before operating the device.
13.1 Operation instructions
W AR NI N G
Start work or settings on the mower only when the
motor stopped, pulled the key contact and blades are
standing still!
AT T EN T I ON
Check all fixing bolts and nuts especially those of the two knives
regularly for tightness and tighten as needed.
NO T IC E
 Read the operating and maintenance instructions carefully.
 Familiarize yourself thoroughly with the control devices and
the proper use of the device. You need to know how the
device works, and how the controllers can be turned off
quickly.
 Never allow children to work with the device.
 Never allow adults to work without proper instruction to the
device.
 Keep the work area free of all persons, particularly small
children and pets.
 Be careful to avoid that you slip or fall.
 It is a normal phenomenon that the mower goes a circle to
calibrate direction while it is working inside wire before it
finishes a circle, it will go on to make a new circle in new
place.
13.2 Activation
There are two locations of start the mower.
1. Take the mower clockwise onto virtual wire, make sure that the mower is not connected with
two charging sheets on charging station. Otherwise, the mower is in recharging Mode, it
cannot be started.
2. Take the robot to start point.
 To set LINE off, the robot begins cutting inside lawn directly.
 To set LINE on, the robot will follow the virtual wire cutting for one circle, and finish
cutting on the virtual wire first