Operating instructions

ASSEMBLY
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at Seite 51
RASENMÄHER-ROBOTER / ROBOT LAWN MOWER ZI-RMR 2600e 51
 The wires leading to the island and returning from it should be
parallel and touding. But do not cross them! If protected
obstacles are grouped closely together demarcate them by a
single. Continuous virtual island if obstacles are dose to edge,
leave them out of the mowing area.
 Care must be taken not to create a corner sharper shorter than 90 degrees when setting up
virtual wire. A corner sharper less than 90 degrees can cause the mower to lose track of
virtual wire. We can make greater than 90 degrees corner like follow picture shows.
 Joining the boundary wire.
If the boundary wire is not
long enough and needs to
be spliced: Use original
solderless couper. It is
waterproof and gives a
reliable electrical
connection.