Operating instructions

ASSEMBLY
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at Seite 50
RASENMÄHER-ROBOTER / ROBOT LAWN MOWER ZI-RMR 2600e 50
If a high obstacle, for example a wall or fence, borders the working area, the virtual wire
should be laid at least 40cm from the obstacle. This will prevent mower from colliding with
the obstacle and reduce body wear.
Use the virtual to demarcate areas inside the working area by creating islands around
obstacles that can not withstand a collision, for example, flower beds and fountains. Run the
cable out to the area, route it around the area to be demarcated and then back along the
same route. If staples are used, the wire should be laid under the same staple on the return
route. When the virtual wire to and from the island are close together, the mower can drive
over the wire.