Operating instructions

ASSEMBLY
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at Seite 47
RASENMÄHER-ROBOTER / ROBOT LAWN MOWER ZI-RMR 2600e 47
12.2 Installation
This chapter describes how you install this mower. Read the whole of this chapter too before starting
the installation. How the installation is made also affects how well the mower will work. It is
therefore important to plan the installation carefully.
12.2.1 Blades
The mowing system used by this mower is based on an effective and energy efficient principle.
Unlike normal lawn mowers, the mower cuts the grass instead of striking it off.
We recommend you allow the mower to mainly mow in dry wether to obtain the best possible result.
The blades must be in good condition to obtain the best mowing result. In order to keep the blade
sharp for as long as possible it is important to keep the lawn free from branches, small stones and
other objects (especially the objects less than 6.5cm height).
NO T IC E
When working on the cutting blades wear protective gloves!
Press the clamshell and open it. Rotate the adjusting knot to adjust the cutting height. Cutting
height from 2.5cm to 6cm. Close the clamshell.
Cutting height explanation: