Owner's manual

Special Procedures For Certain Year Installations
1995-1996 Model Motorcycles
1995 and 1996 model motorcycle must have a ground wire added to the main ECM terminal
connector at Pin 33 (standard on 1997-2001 models). Parts required are (1) terminal connector
H-D # 72326-95 and a length of black wire.
Crimp the terminal end to the wire and add the wire to the open port #33 on the main harness
connector. Attach the other end to a suitable ground source or carefully splice it to the black
wire located at pin 34 (see diagram below).
Once this ground wire is added, proceed with step 20.
6655-A Amberton Drive
Elkridge, MD 21075
Phone [phone]
Fax [phone]
[e-mail]
Page 8 www.Thunder-Max.com 11-15-11