Platform Bed With Storage Queen Black Faux Leather Weight Limit: 500 Lb / 227 Kg Thank you for purchasing ! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Warranty Information Read Before Beginning Assembly We warrant this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
A B C E D All in 1 big box! There are inner box(es) that include components required to complete this assembly. Headboard Footboard Side Panel Side Panel Side Rail X1 X1 X1 X1 X2 H F M I G Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Parts J K L N All in 1 big box! There are inner box(es) that include components required to complete this assembly. Front Panel Drawer Bottom Panel Drawer Back Panel Drawer Side Panel X2 X2 X2 X4 S Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
2 1 1/4" X 3/4" Hardware Pack 5 4 3 1/4" X 3/4" X2 X 13 1/4" X 1 3/16" X6 1/4" X 1 9/16" X7 X 18 9 8 7 6 1/4" X 1 9/16" 6# X 1/2" X 16 1/4" X8 4# X 1 3/16" X 40 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. 4mm X1 The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Step 1 Attach Z and F to C with 5 . F Z C Z C C F 5 Note: Holes on part F should be facing upward.
Step 2 Attach F and Z to D with 5 . D D F Z D F 5 Note: Holes on part F should be facing upward.
Step 3 Attach E X 2 to C and D with 5 .
Step 4 B Attach I to B with 4 .
Step 5 B 5.1 Attach Z X 2 to A with A E 5 5.2 Attach E X 2 to B with 4 ; . 5 4 Z 5.2 5.
Step 6 Insert G X 2 into M with 2 .
Step 7 A Attach G X 2 to A and B with 2 .
Step 8 Attach H to C and D with 2 . C H C Note: small tubes on part H should be facing toward part B.
Step 9 Attach R to E and G with 2 . G R Note: Arched side on part R should be facing upward.
Step 10 X Y X O1 O1 O1 O1 10.1 10.2 10.1 Insert O1 into X; 10.2 Press X into E and F, repeat the same procedure for the opposite side. 10.3 Insert ends of both slats O1 into Y, then press Y into G as illustrated. Repeat the same procedures going backwards for every row of slats. 10.
Step 11 Attach N X 2 to S and L with 7 . X2 Note: before assembling, line up the screws and holes on N with pilot holes on S and L. N S L N 7 Note: For a better looking and for ease of assembly, orientate ALL PANELS with the staples and pilot facing toward the outside and on upper side.
Step 12 Attach K to S , L and N with 7 . X2 Note: For a better looking, orientate the staples toward the outside. K S N L Note: before assembling, line up the screws and holes on K with pilot holes on N, S and L.
Step 13 Attach Q X 4 to K with 6 . Q K Note: before assembling, line up screws and holes on Q with pilot holes on K.
Step 14 J J Turn over sub-assembly from previous step and: S 1 8 8 14.1 3 14.1 Attach 1 and 8 to J. 14.2 Attach sub-assembly N, L and S to J with 3 and 8 . 14.
Step 15 Align both drawers and then push them in. Lock drawers by slightly lifting drawer and inserting the Pin into the Slot.
Helpful Hints Weight Limit: 500 Lb / 227 Kg ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. ● Please remove the drawers before moving your bed.
NO LO REGRESE A LA TIENDA ! Cama Plataforma con Almacenamiento Queen Cuero Falso Negro Fecha de compra Gracias por su compra! Número de lote Si le faltan piezas o las que se incluyen están dañadas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA.
Lea antes de comenzar a ensamblar ● Llame a nuestro número gratuito si necesita asistencia. ● Trabaje en un área espaciosa y cerca de donde su producto será utilizado, preferiblemente sobre una alfombra o utilice el cartón del empaque para proteger su piso y su producto. ● El número de personas recomendadas para el montaje de este producto es: 2 (sin embargo es recomendable contar con ayuda adicional). Tiempo estimado de ensamble es 2 horas. ● Asegúrese de que todas las partes están incluidas.
Instrucciones Paso 1 Una Z y F con C usando 5 . Paso 13 Una Q con K usando 6 . Paso 2 Una F y Z con D usando 5 . Paso 14 14.1 Una 1 y 8 con J. 14.2 Una S con J usando 3 y 8 . Paso 3 Una E X 2 con C y D usando 5 . Paso 4 Una I con B usando 4 . Paso 15 Por favor alinee ambos cajones y luego empújelos hacia adentro. Bloquee los cajones levantándolos ligeramente y luego insertando el Pin dentro de la Ranura. Paso 5 5.1 Una Z con A usando 5 . 5.2 Una E con B usando 4 .
NE RETOURNEZ PAS AU MAGASIN ! Cama Plataforma con Almacenamiento Grand Faux Date d'achat Si une pièce est manquante ou endommagée, nous vous expédierons avec plaisir vos pièces de remplacement gratuitement. Noir Numero de lot Merci d'avoir acheté un produit ! CE FEUILLET CONTIENT DES INFORMATIONS DE SÉCURITÉ IMPORTANTES. S'IL VOUS PLAÎT LIRE ET CONSERVER POUR RÉFÉRENCE ULTÉRIEURE.
Avant de commencer l'assemblage ● Si vous avez besoin d'aide, appelez notre service à la clientèle sans frais. ● Travailler dans un endroit spacieux et près du lieu où l'unité sera utilisée, préférablement sur un tapis, ou sur un morceau de l'emballage pour protéger le plancher et le produit. ● Nombre de personnes recommandé pour l'assemblage: 2 (cependant il vaut mieux toujours d'avoir une main supplémentaire). Le temps d'assemblage estimé est de 2 heures.
Instructions Étape 1 Attacher Z et F à C avec 5 . Étape 14 14.1 Attacher 1 et 8 à J où indiqué; Étape 2 Attacher Fet Z à D avec 5 . Note: Les orificies en F doivent etres orientés vers le haut. 14.2 Attacher S à J à avec 3 et 8 . Étape 3 Attacher E X 2 à C et D avec 5 . Étape 4 Attacher I à B avec 4 . Étape 5 5.1 Attacher Z X 2 à A avec 5 . 5.2 Attacher E à B avec 4 . Étape 6 Insérer G X 2 dans M avec 2 . Étape 7 Attacher G X 2 à A et B avec 2 . Étape 8 Attacher H à C et D avec 2 .
