Platform Bed With Storage Twin Grey Linen Weight Limit: 225 Lb / 102 Kg Thank you for purchasing ! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Warranty Information Read Before Beginning Assembly We warrant this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
Parts B A D C E All in 1 big box! There are inner box(es) that include components required to complete this assembly. Headboard Footboard Side Panel Side Panel Side Rail X1 X1 X1 X1 X1 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Parts J K N L All in 1 big box! There are inner box(es) that include components required to complete this assembly. Front Panel Drawer Bottom Panel Drawer Back Panel Drawer Side Panel X1 X1 X1 X2 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
1 3 2 1/4" X 3/4" 4 Hardware Pack 5 1/4" X 3/4" X1 X 13 1/4" X 1 3/16" X3 1/4" X 1 9/16" X6 6 7 1/4" X 1 9/16" X 21 9 8 6# X 1/2" X8 1/4" X4 4# X 1 3/16" X 20 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. 4mm X1 The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Step 1 D Attach Z X 2 and F X 2 to C and D with 5 .
1st choice for Drawer location C C U Step 2 Note: You have two choices for the drawer location as illustrated. If you intend to place the drawer in the 1st location, then: Attach V to U and C with 5 . U 5 If you intend to place the drawer in the 2nd location, then: Attach V to U and D with 5 .
1st choice for Drawer location E Step 3 1st choice for drawer location: Attach E to D with 5 . D 2nd choice for drawer location: Attach E to C with 5 .
Step 4 Attach I to B with 4 .
Step 5 5.1 Attach Z X 2 to A with 5 . 5.2 Attach E and V to B with 4 . A 5 C Z 2nd choice for Drawer location 5.1 C A C A V Z U Z E V D D E B B U 1st choice for Drawer location B 5 4 4 U V 5.
Step 6 Insert Gx2 into M with 2 .
Step 7 Attach Gx2 to A and B with 2 . 2 Note: We will continue to show the assembly with the drawer placed in 1st location. If you intent to assemble the drawer in the 2nd location please follow the same steps.
Step 8 C Attach H to C and D with 2 . U H C Note: small tubes on part H should be orientated as illustrated, facing toward B.
Step 9 Attach R to E, G and V with 2 . V R 2 Note: arched side on R must be facing upward.
O X X O Y O O G F 10.1 10.2 10.3 Step 10 10.1 Insert O into X; 10.2 Press X into E, V and F, repeat the same procedure for the opposite side. 10.3 Insert ends of both slats O into Y, then press Y into G as illustrated. Repeat the same procedures going backwards for every row of slats.
Step 11 Attach Nx2 to S and L with 7 . Note: before assembling, line up the screws and holes on N with pilot holes on S and L. N S L N 7 Note: For a better looking and for ease of assembly, orientate ALL PANELS with the staples and pilot holes facing toward the outside and on upper side.
Step 12 Attach K to S , L and N with 7 . Note: For a better looking, orientate the staples toward the outside. N K S L N Note: before assembling, line up the screws and holes on K with pilot holes on N, S and L.
Step 13 Attach Qx4 to K with 6 . Q K Note: before assembling, line up screws and holes on Q with pilot holes on K.
Step 14 J J Turn over sub-assembly from previous step and: S 1 8 8 3 14.1 Attach 1 and 8 to J where indicated; 14.2 Attach sub-assembly N, L and S to J with 3 and 8 . 14.2 14.
Step 15 Align the drawer and then push it in. Lock drawer by slightly lifting drawer and inserting the Pin into the Slot.
Helpful Hints Weight Limit: 225 Lb / 102 Kg ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. ● Take the drawer out before moving your bed.
NO LO REGRESE A LA TIENDA ! Cama Plataforma con almacenamiento Individual Si le faltan piezas o las que se incluyen están dañadas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Lino Gris Fecha de compra Gracias por su compra ! Número de lote ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA.
Lea antes de comenzar a ensamblar ● Llame a nuestro número gratuito si necesita asistencia. ● Trabaje en un área espaciosa y cerca de donde su producto será utilizado, preferiblemente sobre una alfombra o utilice el cartón del empaque para proteger su piso y su producto. ● El número de personas recomendadas para el montaje de este producto es: 2 (sin embargo es recomendable contar con ayuda adicional). Tiempo estimado de ensamble es 1.5 horas. ● Asegúrese de que todas las partes están incluidas.
Instrucciones Paso 1 Una Z X 2 y F X 2 con C y D usando 5 Paso 14 14.1 Una 1 y 8 con J donde se indica; 14.2 Una S con J usando 3 y 8 . . Paso 2 Nota: Usted tiene dos opciones para la ubicación del cajón. Si desea colocar el cajón en la 1ra opción: una V con U y C usando Si desea colocar el cajón en la 2da opción: una V con U y D usando 5 5 . . Paso 3 Primera opción para la ubicación del cajón: Una E con D usando 5 . Segunda opción para la ubicación del cajón: Una E con C usando 5 .
NE RETOURNEZ PAS AU MAGASIN ! Lit de Plate-Forme avec Rangement Si une pièce est manquante ou endommagée, nous vous expédierons avec plaisir vos pièces de remplacement gratuitement. Simple Lin Gris Date d'achat Numero de lot Merci d'avoir acheté un produit ! CE FEUILLET CONTIENT DES INFORMATIONS DE SÉCURITÉ IMPORTANTES. S'IL VOUS PLAÎT LIRE ET CONSERVER POUR RÉFÉRENCE ULTÉRIEURE.
Avant de commencer l'assemblage ● Si vous avez besoin d'aide, appelez notre service à la clientèle sans frais. ● Travailler dans un endroit spacieux et près du lieu où l'unité sera utilisée, préférablement sur un tapis, ou sur un morceau de l'emballage pour protéger le plancher et le produit. ● Nombre de personnes recommandé pour l'assemblage: 2 (cependant il vaut mieux toujours d'avoir une main supplémentaire). Le temps d'assemblage estimé est de 1.5 heures.
Instructions Étape 1 Attacher Z X 2 et F X 2 à C et D avec 5 . Étape 2 Note: Vous avez deux choix pour placer le tiroir. 1er choix: attacher V à U et C avec 5 . 2eme choix: attacher V à U et D avec 5 . Étape 3 Première choix pour la localisation du tiroir: Attacher E à D avec 5 . Deuxième choix pour la localisation du tiroir: Attacher E à C avec 5 . Étape 4 Attacher I à B avec 4 . Étape 5 5.1 Attacher Z X 2 à A avec 5.2 Attacher E et V à B avec Étape 6 Insérer G X 2 dans M avec 5 4 2 . . .
