STEP 1 Wall 16"W 1 1 57.75"H 57.75"H Floor For your safety please insert Anchors (1) into the wall as above drawing shown.
STEP 2 A Open the desk by using both grooves on the front panel at the same time. 1. Attach Safety Lock (3) to Desk (A) using included Screws (3). 2. Open Desk (A) carefully as above drawing shown, open the desk by using both grooves on the front panel at the same time. NOTE: It is recommended that this desk should be assembled by two persons.
STEP 3 Wall 1 1 B B 2 Floor 1. Assemble Desk (A) to the wall using Screws and Flat Washers ( 1) as above drawing shown. 2. Insert Shelf Supports (2) into the holes on Desk (A), then put Shelves (B) on top of Shelf Supports (2).
STEP 4 Diagram 2 Warning: 1. Max load capacity 100lbs. 2. Only use chalk to write on the blackboard. 3. Only use whiteboard marker to write on the whiteboard. Wall Watch your hand Diagram 1 When closing the desk, unlock the safety hinge by pushing in slightly(see diagram 1) , then fold the desk back and lock with top safety lock(see diagram 2). NOTE: Please watch your hand when pushing the safety hinge.
