50” WALL MOUNTED ELECTRIC FIREPLACE HEATER OWNER’S MANUAL AC 110-120V 60Hz 1500W WARNING Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury. CAUTION Keep this owner’s manual for future reference. If you sell or give this product away, make sure this manual accompanies this product.
Wall Mounted Electric Fireplace 3 Table of Contents General Information........................................................................................................................................... 5 ETL Approval Listing Information ..................................................................................................................... 5 Fireplace Specifications .......................................................................................................................
Wall Mounted Electric Fireplace 4 IMPORTANT SAFETY INFORMATION WARNING! • • • • • • • • • • • • • • • • • • • • • • • THIS FIREPLACE IS HOT WHEN IN OPERATION AND CAN CAUSE SEVERE BURNS Do not operate fireplace before reading and understanding operating instructions. Failure to operate fireplace according to operating instructions could cause fire or injury. Risk of burns. This fireplace is HOT when in operation and heating element is ON.
Wall Mounted Electric Fireplace 5 General Information ETL Approval Listing Information This fireplace has been tested in accordance with the ETL Standards for fixed and location-dedicated electric room appliances in the United States and Canada. Note: This fireplace must be electrically wired and grounded in accordance with local codes.
6
Wall Mounted Electric Fireplace 7 Unpacking Your Fireplace Parts and Hardware Tools Required • Phillips-head screwdriver • Stud finder • Level • Tape measure • Electric drill • 1/4” wood drill bit What’s in the Box Wall Bracket Wood Screws Drywall anchors **screws not drawn to scale** **anchors not drawn to scale** Wall Mount Bracket Remote Control Fire Log Crystal Embers Plastic Tray Unpacking and Setup Unpacking Instructions: • Remove all parts and hardware from the carton and place them on a
Wall Mounted Electric Fireplace 8 Wiring Touchstone Wall Mounted Electric Fireplaces come with a 3-prong plug which plugs into any standard 110v outlet. Testing the Fireplace Prior to Installation • • • Before installing the fireplace, test the fireplace to make sure that it operates properly. Plug fireplace into approved outlet and power on fireplace. Once fireplace is tested, continue with installation. If you have any problems, please contact us.
Wall Mounted Electric Fireplace 9 Installation WARNINGS • • • • • • Due to high temperatures, keep the fireplace out of high traffic locations. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 36” away from the front of the fireplace. Never install the fireplace where it may fall into a bathtub or other body of water. Wear safety gloves and safety glasses for protection during installation. Broken glass may cause injury or harm.
Wall Mounted Electric Fireplace 10 Removing The Wall Mount Bracket From Fireplace Tools: - Phillips-head screw driver Instructions: 1. Take the fireplace out of the packaging and place it on a flat, non-abrasive surface. 2. Remove the screws holding the wall mount bracket to the back of the fireplace with a Phillips-head screwdriver. The bracket must be held tightly while screws are being removed to avoid them from falling on the fireplace and causing damage or injury. 3.
Wall Mounted Electric Fireplace 11 Removing The Glass Panel Prior to installation, it is best to remove the glass panel. Please remove glass panel as per instructions below: Tools Needed: - Phillips Screwdriver Instructions: 1. Remove the 2 screws shown (1 on each side of the fireplace) to unlock the glass panel from the fireplace. Keep the screws in a safe place for reinstallation when the glass panel is reinstalled on the fireplace. 2.
Wall Mounted Electric Fireplace 12 Wall Mounted Installation • Due to many different finish materials use on walls, it is highly recommended that you consult your local builder before you install this fireplace on the wall. • Select a location that is not prone to moisture and is located at least 36” away from combustible materials such as curtains, drapes, furniture, bedding, or other combustible materials. Instructions 1.
Wall Mounted Electric Fireplace 13 Wall Mounted Installation – cont. 5. Mark location of bracket on wall and then mount the bracket to the wall using the supplied screws and dry wall anchors. The hooks in the bracket MUST be pointed away from the wall, upward, and level. Note: Mount bracket to at least 2 studs. If 2 studs cannot be used, ensure that the supplied dry wall anchors are used to affix the bracket to the wall and the bracket is adequately secured before moving to the next step. 6.
Wall Mounted Electric Fireplace 14 Installing Logs and Glass Crystals Touchstone Wall Mounted Electric Fireplaces come with both a faux log bed and glass crystals. To achieve the desired look, the user can install either the faux log bed or the glass crystals. Both options cannot be used at the same time. Faux Log Installation Instructions 1. With the glass panel removed, place the faux log bed in place. 2. If using the fire log, please move to p. 15 and install the glass panel.
Wall Mounted Electric Fireplace 15 Installing Logs and Glass Crystals - cont Glass Panel Installation Instructions – cont. 2. Arrange the decorative crystals on the shelf in the desired position.
Wall Mounted Electric Fireplace 16 Installing The Glass Panel Once the fireplace is ready for use, reinstall the glass panel. Tools Needed: - Phillips Screwdriver Instructions: 1. Reinstall the glass panel on the fireplace. Line up the glass panel with the firebox and move the glass panel down to lock the glass panel in place. 2. Once the glass panel is reinstalled on the fireplace, secure the glass panel with the 2 glass panel screws removed earlier, as shown on p. 11.
Wall Mounted Electric Fireplace 17 Operating Fireplace Once the fireplace has been plugged into a grounded outlet, the fireplace is now ready for operation. Ensure that the house circuit breakers for the power supply are turned on. Power Plug the power cable into a 110v 15 amp grounded outlet. Make sure the outlet is in good condition and that the plug is not loose. NEVER exceed the maximum amperage for the circuit. DO NOT plug other appliances into the same circuit.
Wall Mounted Electric Fireplace 18 Methods of Operation This electric fireplace can be operated by the TOUCH PANEL, located on the BOTTOM right side of the fireplace, or by the battery-powered REMOTE CONTROL. The operation and functions of the two methods are the same. Remote Control Control Panel Remote Control and Touch Panel Functions Control Panel and Remote Control Functions BUTTON POWER FUNCTION 1. Press once. Indicator light turns on. Power turns on. All functions enabled.
Wall Mounted Electric Fireplace 19 Remote Control Operation • This remote control uses one CR2025 battery (included in remote) • Slide out the plastic tag from the bottom of the remote to activate the battery and remote. • Instructions for battery installation are located on the back of the remote control • To improve operation of the remote control, aim the remote control at the front of the fireplace. DO NOT PRESS the buttons too quickly. Give the unit time to respond to each command.
Wall Mounted Electric Fireplace 20 Care and Maintenance Cleaning • ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving the fireplace. Failure to do so could result in electric shock, fire, or personal injury. • NEVER immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury. Metal: • Buff using a soft cloth, slightly dampened with citrus oil-based product.
Wall Mounted Electric Fireplace 21 Warranty Touchstone Home Products, Inc warrants our electric fireplaces to be free of defects in material and workmanship for one year from date of purchase. Touchstone will repair or replace any fireplace or fireplace part that is deemed defective or becomes defective during normal use within one year after the date of purchase.
