Installation & Assembly

Table Of Contents

Assembly Instruction

WARNING:

>This unit has been designed to support the

maximum loads shown. Exceeding these

load limits could cause sagging, instability,

product collapse, and/or serious injury.

>DO NOT allow children to climb on unit.

>Put heavier items on lower shelves.

Recommended Maximum Weight

Simplistic Study Table

*Unit in Pound(lbs)

STEP 4

Attach Panel (A) to assembled unit and tighten Mini Fix Cam (3), as shown.

Tools Required

Recomm. 1 Person

Approx. 20 minutes

PAGE 1
STEP 4 Attach Panel (A) to assembled unit and tighten Mini Fix Cam (3), as shown. Assembly Instruction Simplistic Study Table Approx. 20 minutes Recomm. 1 Person Tools Required Recommended Maximum Weight WARNING: 20 >This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. >DO NOT allow children to climb on unit. *Unit in Pound(lbs) >Put heavier items on lower shelves.
PAGE 2
No Hardware List Qty 1 Dowel 4pcs 2 Screw 3 No Parts List Qty A Top Panel 1pc 8pcs B Left Side Panel 1pc Mini Fix Cam 4pcs C Right Side Panel 1pc 4 Mini Fix Bolt 4pcs D Center Bar 2pcs 5 Nail Leg 4pcs STEP 1 STEP 2 Insert Mini Fix Bolt (4) into the pre-drilled holes on Panel (A). 2.1 Install Dowel (1) and Nail Leg (5) into Panel (B) & (C), as shown: 2.2 Install Mini Fix Cam (3) into the pre-drilled holes on Panel (B) & (C).