TOOLS REQUIRED Phillips Screwdriver (Not Included) 2 - People Recommended ASSEMBLY RATING EASY DIFFICULT The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
/ 15
/ 15
ASSEMBLY CARE ADVICE FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. Turn clockwise to tighten and only tighten when step is completed or when instructed to do so. Position each part correctly and insert screws or bolts into their respective holes. Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and/or bolts, may require hand tools to avoid causing damage during assembly.
/ 15
BUFFET BAR TABLE A E H G D PARTS A 1PC E 1PC B 1PC F 2PCS I 4PCS J 4PCS K 5PCS C 1PC G 1PC L 5PCS D 1PC H 1PC M 2PCS ACCESSORIES HARDWARE 1 16PCS 2 16PCS 3 28PCS 4 20PCS A1 5PCS 0.87" 1.25" 5 8PCS 1.97" 6 4PCS A2 20PCS A3 1PC 7 16PCS 8 1PC 0.
GET READY Please group boards as below.
1 Hardware Hardware Hardware Hardware 1 1 1 3 6 7 x12PCS x12PCS x4PCS x8PCS 1 1 1 A 1 1 1 6 7 7 X4 1 1 1 1 B C 3 3 3 3 A5 E OPTIONAL Apply a dab of glue into dowel holes of panels before inserting dowels (#3).
2 3 Hardware 1 x4PCS Hardware 3 x16PCS X4 Accessory A1 x5PCS Accessory A2 x20PCS I 3 3 3 A5 J X4 OPTIONAL Apply a dab of glue into dowel holes of panels before inserting dowels (#3).
3 Part B Part C Part E Part F Front Top x1PC x1PC x1PC x2PCS 2 F B Hardware 2 x4PCS E F 2 2 2 C 1 2 4 Please refer to page 5 for detailed instructions on how to fasten cam locks (#2) to cam bolts (#1). Attention on Orientation: The distance between the hole to the end of panel (#A) is shorter on this end.
5 Part K x5PCS 4 4 Hardware 4 x10PCS B K K C Front Top A 6 Part L x5PCS L L Hardware 4 x10PCS 4 4 B L C Front Top A 11 / 15 4
7 I A3 Part I x4PCS I 5 Hardware 5 x4PCS Accessory A3 x1PC C 5 5 5 I I B Front Top 8 J Part J x2PCS Hardware 2 x2PCS Front J Top 2 A 1 2 Use the provided stickers (#A4) to cover exposed locks.
9 J Front Part J x2PCS Top Hardware 2 x2PCS J 2 1 2 2 Use the provided stickers (#A4) to cover exposed locks.
11 5 Front A3 Part D x1PC 5 Hardware 2 x4PCS Hardware 5 x4PCS 2 5 Top D Accessory A3 x1PC 5 2 1 2 Use the provided stickers (#A4) to cover exposed locks. 2 2 X4 12 Top Part G x1PC Part H x1PC Front Hardware 7 x8PCS 7 7 HOLE USAGE Align screws with the darkened holes in the above diagram. HINGE ADJUSTMENT H G Depth Adjustment. Length Adjustment.
13 ASSEMBLY COMPLETED Please ensure the furniture rests on an even and flat surface. If the produst wobbles or feels loose,double-check all bolts and/or screws are properly tightened and secured. Keep this handy! Please retain this instruction manual and any order-related information for future reference. Lift, dont drag! To avoid damage to product please always LIFT the product when transporting of adjusting the placement.