Assembly Instructions

Figure 9
Insert cam locks (4) into holes on
assembled unit from figure 8. Screw
cam bolts (5) into holes on back leg (J).
Attach back leg (J) to assembled unit
from figure 8 by inserting wood dowels
(2) and cam bolts (5) into
corresponding holes until assembled
unit from figure 8 and back leg (J)
meet.
Tighten by rotating cam locks (4)
clockwise with Phillips screwdriver.
Cover cam lock holes with covers (6).
Make sure the additional cam lock and
wood dowel holes are facing outwards
as shown in the illustration.
Figure 10
Insert screws (3) through bottom
stretcher (D) and into the predrilled
holes on right short shelf (F).
Tighten screws (3) with Phillips
screwdriver.
2
Page 8
Holes
facing out