Assembly Instructions

Figure 7
Insert screws (3) into bottom stretcher
(D). Attach bottom stretcher (D) to left
long shelf (E) by inserting screws (3)
into predrilled holes on left long shelf
(E).
Tighten screws (3) with Phillips
screwdriver.
Make sure to insert the screws through
the big hole on bottom stretcher (D)
rather than the small hole.
Figure 8
Insert cam locks (4) into corresponding
holes on back panel (I) and assembled
unit from figure 7. Screw cam bolts (5)
into holes on left side leg (B).
Attach back panel (I) and assembled
unit from figure 7 to left side leg (B) by
inserting wood dowels (2) and cam
bolts (5) into corresponding holes until
assembled unit from figure 4 and back
panel (I) and left side leg (B) meet.
Make sure back panel (9) has the cam
lock holes facing upward.
Tighten by rotating cam locks (4)
clockwise with Phillips screwdriver.
Cover cam lock holes with covers (6).
E
D
3
2
Page 7
Cam lock holes
facing up