Assembly Instructions

Corner Desk
Assembly Instructions
Figure 1
Please do not over-tighten cam locks.
Please stop when you feel them
tighten.
Attach hinges (7) to drawer front panel
(K) and drawer front stretcher (L) by
using screws (8) as shown.
Figure 2
Insert cam locks (4) into holes on
drawer back panel (N) and drawer front
stretcher (L). Screw cam bolts (5) into
holes on drawer right panel (G). The
cam lock hole for drawer front stretcher
(L) should be facing down as shown on
the illustration. Make sure the holes for
the cam locks on drawer right panel (G)
and drawer back panel (N) are facing
upwards as shown.
Attach drawer left panel (H) to drawer
back panel (N) and drawer front
stretcher (L) by inserting wood dowels
(2) and cam bolts (5) into
corresponding holes until drawer right
panel (G), drawer back panel (N), and
drawer front stretcher (L) meet.
Tighten by rotating cam locks (4)
clockwise with Phillips screwdriver.
Make sure not to over tighten.
7
8
K
L
Page 4
Cam lock holes facing up
White / Black / Espresso