Assembly Instructions

Figure 13
Insert cam locks (4) into holes on
assembled unit from figure 12. Screw
cam bolts (5) into holes on the bottom
of wood top (A).
Attach wood top (A) to assembled unit
from figure 12 by inserting wood
dowels (2) and cam bolts (5) into
corresponding holes until assembled
unit from figure 12 and wood top (A)
meet.
Insert bolts (1) through lock washers
(13) and flat washers (12) to connect
assembled unit from figure 12 and
wood top together.
Tighten by rotating cam locks (4) and
bolts (1) clockwise with Phillips
screwdriver.
Cover cam lock holes with covers (6).
This step is easier with the help of
another person.
Figure 14
Turn the table upside down.
Insert screws (3) into holes on
assembled unit from figure 13 as
shown.
Tighten screws (3) with Phillips
screwdriver.
Page 10