Owner Manual

ManualsBrandsZipcode Design ManualsCoffee TablesSenoia Frame Coffee Table

Table Of Contents

Questions, problems, missing parts?

Before returning to your retailer, our exceptional customer service is available.

SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE.

ATTACH YOUR RECEIPT HERE

Keep a copy of your proof of purchase or order

conrmation which will be needed if you need to

Purchase Date:

COF

FEE

TABLE

Summary of content (5 pages)

PAGE 1
COFFEE TABLE ATTACH YOUR RECEIPT HERE Keep a copy of your proof of purchase or order confirmation which will be needed if you need to contact us about warranty coverage. Save these instructions for future reference. Purchase Date: Questions, problems, missing parts? Before returning to your retailer, our exceptional customer service is available.
PAGE 2
INFORMATION beFOre YOu beGin Before beginning assembly, make sure all parts are present. Compare parts received with the “Parts List.” If any part is missing or damaged, do NOT attempt to assemble the product. Please read and understand this entire manual before attempting to assemble this product. If you have any questions regarding the product, please call us tollfree, email us, or go online and live chat. General inFOrMaTiOn This item is made of hollow board and a metal frame.
PAGE 3
PARTS LIST A B C PART DESCRIPTION QUANTITY A Frame Side 2 B Top Support 2 C Base Support 2 D Tabletop 1 HARDWARE CONTENTS D E F Bolt M8x35mm Qty: 8 Bolt M6x12mm Qty: 4 G H Lock Washer Qty: 8 Hex Key Qty: 1 PREPARATION Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are missing, please contact Customer Service. Place all parts on a soft, level surface for assembly.
PAGE 4
ASSEMBLY 1 Prepare to assemble the table base by placing Lock Washers G on all 8 Bolts E. Consult the diagram for proper alignment and orientation of each support piece. Align the hole in the end of 1 Top Support B with the hole at the corner of 1 Frame Side A. Orient the Top Support so the 2 tabs along the side are at the top edge and facing toward the inside as shown. Connect the two pieces using a Bolt+Lock Washer E+G. Tighten gently using the Hex Key H.
PAGE 5
LIMITED WARRANTY Customers in the Contiguous US This product is warranted for a period of 1 year from original purchase date against defects in materials and workmanship under normal use. This warranty does NOT cover normal wear/weathering, exposure to water, freezing temperatures, oils, fluids, or chemicals, OR use in a commercial application if model is not designated as a commercial model. At our sole discretion, products under warranty will be repaired and/or replaced at no charge to the customer.