Assembly Instruction

ManualsBrandsZipcode Design ManualsFurnitureGail Ergonomic Task Chair

PART QTY PART QTY PART QTY

① 1Star Base ⑥ 1

4 Washer

② 1 Cylinder Column ⑦ 1

Allen Wrench

③ 1 Control Mechnism A 4

Caster

④ 1Seat B 4

Cap Cover (Upper)

⑤ 1 Back Frame C 4

Cap Cover(Lower)

· USE THIS PRODUCT ONLY FOR SEATING ONE PERSON AT A TIME. · IF ANY PARTS ARE MISSING, BROKEN, DAMAGED OR WORN, STOP USE

· DO NOT USE THIS CHAIR AS A STEP STOOL/LADDER. OF THE PRODUCT UNTIL REPAIRS ARE MADE USING FACTORY

· DO NOT SIT ON ANY PART OF THE CHAIR EXCEPT THE SEAT. AUTHORIZED PARTS.

· DO NOT USE CHAIR UNLESS ALL BOLTS, SCREWS AND KNOBS ARE WARNING: TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES &

TIGHT. CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES, PLAY PENS OR AS HEAD COVERING.

· IT'S ADVISED TO PERIODICALLY CHECK ALL BOLTS, SCREWS · FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.

AND KNOBS TO BE SURE THEY ARE TIGHT.

ASSEMBLY INSTRUCTION

Left Arms

NOTE:The discarded packaging for the unit can be used as a helpful w

ay to support it during the assembly process.

PREVENTIVE MAINTENANCE AND WARNING!

Right Arms

Allen Bolt 6 x 25 x10 mm

Allen Bolt 6 x 20 x 10 mm

Allen Bolt 6 x 35 x10 mm

STEP 1.

AS WITH ALL MOVABLE MECANICAL DEVICES; IT

IS ADVISED TO PERIODICALLY CHECK TO MAKE

SURE ALL BOLTS, SCREWS AND KNOBS ARE

FULLY TIGHTENED TO ENSURE STABILITY.

NOTICE:

TTACH BACK TO ARMS,

AND FULLY TIGHTEN ALL SCREWS.

STEP 3.STEP 2.

STEP 4.

BACKOFCHAIR

UNDERSIDEOFCHAIR

CONTROL MECHANISM SUPPLEMENT

1.While seated,lean forward,lifting your

body weight from the seat.Reach

underneath the right side of the chair and

located the Height Adjustment Handle.lift

the handle up slowly to allow the chair to

rise to the desired height.To lower the

seat height,lift the handle slowly while

seated.

2.Use the Tilt adjustment Knob to control

how far back your chair will lean.

TO ALLOW free movement,rotate the Tilt

Adjustment Knowb toward the LEFT.

TO INHIBIT free movement,rotate the Tilt

Adjustment Knob toward the RIGHT

Office chair

KEEP THIS PAGE FOR FUTURE REFERENCE.

Remove all items from the carton.Verify all pieces before assembly