Assembly Instruction Thank you for your purchase. If you have difficulty with assembly or find a part is missing or damaged, please don’t hesitate to contact us for solution. Customer Service team will work hard to put a smile back on your face.
NO PARTS QTY DESCRIPTION tT TET 1pe Back Cushion heed TEL .
H 3 pos Maxima FLAT WASHER J 1pe ALLEN KEY K omens 2 pos Maxima SCREW L (7 6 pes COVER pes Dadaist Note: 1.Please lay a soft carpet on floor before assemble to protect the paint of chair. 2. When installing the-screws, the screws only heed to be screwed to 70%. After all the screws reinstalled, tighten them one by one. STEP 1 1. Connect KICKBACK) 16: SEAT(B) + 2.
STEP 2 ARMREST (C), separate the left: and right handrails, ‘and then take out an ARMREST (C) and connect BACK (A) as.shown in the figure; 2. Usé ALLEN KEY) to:sérew SCREW(E) into the Hole of BACK (A): Note: When installing the screw, the screw only needs to be: completed to 70% STEP:3 1.
STEPS Sere SCREWIER) fonts CROSSPIECES) STEPS 1 Screws all screws one by one to 100% 2.
