4 Drawer Dresser Date of Purchase ___ / ___ / ___ Lot Number: Do Not Return This Product! Contact our customer service team for help first. THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Secure Your Furniture Keep your home and family safe with the wall anchor kit that is included with the product. Serious or fatal crushing injuries can occur from tipping furniture.
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 2 HOURS - Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly. - Compression dowels are lightly tapped in with a hammer. - Slides are labeled with a R (right) and L (left) for proper placement.
Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification Not actual size E C B A (x2) Back Top D Left Panel Right Panel H (x4) Drawer Bottom F (x4) Drawer Front Bottom K J Kick Support DWR BACK Back Panel 4 (x8) Drawer Side This part is paperboard construction. It is not made from wood, but is required for the assembly of your unit.
Board Identification Not actual size This part is paperboard construction. It is not made from wood, but is required for the assembly of your unit.
Part List Actual Size 1 2 (x14) #A22610 cam bolt 6 3 (x14) #A22620 cam lock 5 4 (x10) #A21660 wood dowel (x40) #A11080 7/16" flat screw (x54) #A12120 7/16" pan screw 9 7 8 (x18) #A21110 nail (x16) #A21970 drive fastener (x8) #A12700 7/8" pan screw (x4) #A53510 angle bracket Not Actual Size 10a left cabinet member 12a 11 12c 10b right cabinet member (x8) #A54520 10c drawer bracket left drawer member 10d right drawer member (x4) #A56740 drawer slide pkg.
STEP 1 12b 1 12a (x4) #A22610 (x1) #A84050 1 Do not fully tighten this screw.
STEP 2 2 5 3 (x10) #A22620 (x8) #A21660 (x8) #A12120 5 9 (x4) #A53510 2 9 5 3 2 K D 2 2 3 3 J 2 3 2 2 3 E 2 3 8 x2
STEP 3 2 1 (x5) #A22610 3 (x2) #A22620 4 (x1) #A21660 10a mark with a "L" left cabinet member (x4) #A56740 (x12) #A11080 1 Proper orientation of CAM LOCK 1 1 1 2 10a 1 10a A 2 10a 4 finished edge 10a 3 9
STEP 4 2 1 (x5) #A22610 3 (x2) #A22620 4 (x1) #A21660 10b mark with a "R" right cabinet member (x4) #A56740 (x12) #A11080 1 1 1 Proper orientation of CAM LOCK 1 10b 2 1 10b B 10b 4 finished edge 10b 10 2 3
STEP 5 UNLOCK finished edge A E E 11 LOCK
STEP 6 UNLOCK finished edge A J K D E 12 LOCK
STEP 7 UNLOCK finished edge B J E A K D 13 LOCK
STEP 8 UNLOCK C B A 14 LOCK
STEP 9 6 5 (x6) #A12120 (x18) #A21110 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. With the help of another person, carefully turn your unit over on its front side. Make sure the unit is square. Position the back panel as shown. Using screws (5), attach back panel to back (E) but do not tighten the screws. Align the back panel equally with outside edges and nail straight through into back edges as shown. Now tighten the screws (5).
STEP 10 5 11 (x8) (x16) #A54520 #A12120 Line up the drawer bracket (11) with the holes in the drawer sides as shown and attach with screws (5).
STEP 11 5 (x16) #A12120 Be sure to center the groove in the drawer sides with the groove in the drawer front (F). 5 5 DWR SIDE 5 5 DWR SIDE F x4 Please note, you will repeat this step for each of the 4 drawers.
STEP 12 7 (x16) #A21970 Note: You will need to tap the drive fastener (7) with a hammer to securely fasten.
STEP 13 4 13 left drawer member 8 right drawer member (x16) #A11080 (x8) #A12700 (x4) #A56740 (x4) #A50695 Attach the slides first and then the handle.
STEP 14 5 (x8) #A12120 14 (x4) #A54900 Turn each drawer over. Using screws (5), attach the drawer brace (14) as shown.
STEP 15 12c For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. 12d (x1) #A84050 IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. WARNING hole Serious or fatal crushing injuries can stud occur from furniture tipover.
STEP 16 Note: The drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 25 lbs 11.3 kg (each drawer) 50 lbs 22.7 kg Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1. This certificate applies to our product identified by this instruction manual. 2.
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You" to all of our customers for taking the time to assemble this product, and to give us your valuable feedback.
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere). No Permita que los niños monten el mueble.
Español Página 7 No ajuste este tornillo a fondo. Página 15 ¡IMPORTANTE! EL PANEL POSTERIOR ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y DEBE INSTALARSE ADECUADAMENTE. Con la ayuda de otra persona, voltee cuidadosamente la unidad sobre su parte frontal. Asegúrese de que la unidad esté a escuadra. Coloque el panel posterior tal como se indica. Utilizando tornillos (5), fije el panel posterior a la parte posterior (E), pero no ajuste los tornillos.
Español Página 21 Para mampostería, concreto u otro tipo de paredes: Acude a tu ferretería local para obtener los anclajes adecuados para fijar de forma segura el soporte de seguridad. IMPORTANTE: ESTA UNIDAD DEBE ASEGURARSE A UNA PARED PARA EVITAR QUE SE VUELQUE. SIGUE ESTAS INSTRUCCIONES PARA INSTALAR EL SOPORTE DE SEGURIDAD ANTICAÍDA QUE SE PROPORCIONA JUNTO CON ESTE PRODUCTO. ADVERTENCIA Un mueble al volcarse puede provocar heridas por aplastamiento que pueden resultar graves o mortales.
Español Página 22 Nota: Los agujeros de las ménsulas de los cajones se encuentran marcados. El frente de los cajones puede regularse aflojando los tornillos, realizando los ajustes necesarios y volviendo a ajustar los tornillos. Página 23 CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones. ADVERTENCIA: Riesgo de lesiones a las personas - no coloque un televisor sobre muebles.
Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort. Ancrer le meuble à une planche murale dans le mur (si indiqué). Ne laissez pas les enfants grimper sur le meuble.
Français Page 7 Ne serrez pas la vis à fond. Page 15 IMPORTANT! LE PANNEAU ARRIÈRE EST UNE PARTIE STRUCTURELLE DE CETTE UNITÉ ET DOIT ÊTRE INSTALLÉ CORRECTEMENT. Avec l'aide d'une autre personne, positionnez soigneusement votre unité sur sa face avant. Assurez-vous que l'unité est carrée. Positionnez le panneau arrière tel que démontré. À l'aide des vis (5), fixez le panneau arrière au dos (E) mais ne serrez pas les vis.
Français Page 21 Pour la maçonnerie, le béton ou d'autres matériaux de mur : Visiter votre quincaillerie locale pour obtenir des ancres appropriées qui permettront de fixer solidement le support de sécurité. IMPORTANT : CE MEUBLE DOIT ETRE SÉCURISÉ AU MUR POUR EVITER QU'IL NE BASCULE. SUIVRE CES INSTRUCTIONS POUR INSTALLER LE SUPPORT DE SÉCURITÉ ANTI-BASCULEMENT FOURNI AVEC CE PRODUIT. AVERTISSEMENT Des blessures graves ou mortelles peuvent se produire en cas de basculement des meubles.
Français Page 22 Remarque : Les trous du support de tiroir sont encastrés. Les faces avant du tiroir peuvent être ajustées en desserrant les vis, en effectuant les réglages nécessaires et en resserrant les vis. Page 23 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves.
