Installation & Assembly

STEP 1
STEP-1:
1. Insert 2 Metal Connection Bars (A) into the holes on the end of Left Upper Side Panel (4), make sure the hole on
the Metal Connection Bar (A) is towards the hole on the Left Upper Side Panel (4).
2. Insert 2 screws (D) through the holes on the Left Upper Side Panel (4) and tighten to Metal Connection Bar (A).
3. Attach Left Lower Side Panel (5) to Left Upper Side Panel (4) by inserting the Metal Connection Bar (A) into the
holes on end of Left Lower Side Panel (5), make sure the hole on the Metal Connection Bar (A) is towards the
hole on the Left Lower Side Panel (5).
4. Insert 2 screws (D) through the holes on the Left Lower Side Panel (5) and tighten to Metal Connection Bar (A).
5. Repeat above steps to connect the Right Upper Side Panel (6) and Right Lower Side Panel (7).
STEP 2
STEP-2:
1. Attach 2 Cross Bars (8) to pre-assembled left side panel (4,5) by inserting 2 Long Screws (C) through the holes
on the Left Side Panel then tighten to Cross Bar (8).
2. Attach Top Shelf (1) to Left Side Panel by inserting 2 Screws (B) through the holes on the Top Shelf (1) then
tighten to the Left Side Panel.
3. Repeat Step #2 to attach Second Shelf (2) and Third Shelf (3).