Assembly Instructions Caution: You must read this before you proceed Sofa Part List Label A Picture Description QTY Sofa Back 1 Page 1 OF 10
B Sofa Seat 1 C Left Leg 1 D Right Leg 1 E Lower Apron 1 Description QTY ① Bolt (M6x70mm) 3 ② Bolt (M6x50mm) 5 ③ Bolt (M6x40mm) 7 Hardware Label Picture Page 2 OF 10
④ Spring Washer 13 ⑤ Washer 11 ⑥ PVC Nail Leg 5 ⑦ Allen Key 1 ⑧ Wood Dowel (M8x30mm) 5 ⑨ Half Moon Washer 3 ⑩ Screw (M4x32mm) 2 ⑪ Rubber Hammer (Not Provided) 1 ⑫ Screwdriver (Not Provided) 1 Assembly Preparation Page 3 OF 10
Before Beginning Assembly: 3X 5X 7X 13X 11X 5X 1X 5X 3X 2X 1X ( Not Provided ) 1X ( Not Provided ) Page 4 OF 10
Assembly Steps Overview Right Leg (D) Sofa Back (A) Sofa Seat (B) Left Leg (C) Lower Apron (E) FRONT FACING This Sofa has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Sofa parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
Step 2 Insert Wood Dowels(⑧) into Lower Apron(E) using the Rubber Hammer(⑪). Step 3 Black Woven Cover Place the Sofa Back(A) onto a clean, non-marring surface. Open the black woven cover under the Sofa Seat(B). Attach Sofa Seat(B) to Sofa Back(A) using Bolts(②), Spring Washers(④), and Washers(⑤) with Allen Key(⑦). Do not fully tighten the Bolts.
Step 4 Black Woven Cover Black Woven Cover Place Right Leg(D) facedown on a clean, non-marring surface. Open the black woven cover on the Sofa Back(A). Attach Sofa Back(A) and Sofa Seat(B) to Left Leg(D) using Bolts(③), Spring Washers(④), and Washers(⑤) with Allen Key(⑦). Do not fully tighten the Bolts. Step 5 Attach Sofa Back(A) and Sofa Seat(B) to Left Leg(C) using Bolts(③), Spring Washers(④), and Washers(⑤) with Allen Key(⑦). Do not fully tighten the Bolts.
Step 6 Black Woven Cover Black Woven Cover Close the black woven cover of the Sofa Seat(B). Insert the Lower Apron(E) into the Left Leg(C) and Right Leg(D) as pictured. Attach Lower Apron(E) into the Left Leg(C) and Right Leg(D) using Bolts(①), Spring Washers(④), and Half Moon Washer(⑨) with Allen Key(⑦). Do not fully tighten the Bolts. Step 7 Attach Lower Apron(E) to Sofa Seat(B) using Screw(⑩) with Screwdriver(⑫). Attach PVC Nail Legs(⑥) into the bottom of Sofa Legs with Rubber Hammer(⑪).
Step 8 Place the Sofa on a LEVEL SURFACE. Gently and carefully sit into the Sofa. This will help to align all Parts and Bolts fully. Test the Sofa for wobbles. If no wobbles are found then proceed to tighten all Bolts in a sequential manner. Do not tighten any Bolt fully and then move on towards the next one, this could cause the frame to warp. Inspect it and make sure all parts are adequately connected. Close the black woven covers on Sofa Seat(B) and Sofa Back(A). Your Sofa is ready for use.
Page 10 OF 10
