Assembly Instructions

Step 1
Step 2
Place the Chair Seat(A) facedown on the edge of a clean Table Top.
Attach Leg Frame(B) to Chair Seat(A) using Bolts(②), Washers(③), and Spring
Washers(④) with Allen Key(①) as pictured above.
Do not fully tighten the Bolts.
Stand the Chair up and place on flat, level surface.
Carefully and gently sit onto the Chair.
This will help properly align all parts at all joints and remove any gaps.
Carefully get off the Chair and gently turn it over.
Then proceed to tighten all Bolts at all joints.
When tightening the Bolts, tighten sequentially.
Do not tighten any Bolt fully and then move on towards the next one, this could
cause the frame to warp.
If the Chair is not Stable it could lead to damage to the product.
Your Dining Chair is ready for use.
This Dining Chair can only be used on a flat, level surface.
Page 3 OF 4