Caution : You must read this before you proceed Dining Chair Label Description QTY A Chair Body 1 B Leg Frame 1 Description QTY ① Allen Key 1 ② Bolt (M6*20mm) Washer (18mm) Spring Washer (12mm) Label ③ ④ Picture Picture 5 5 5 Page 1 OF 4
Before Beginning Assembly: Overview Chair Body (A) Leg Frame (B) FRONT FACING This Dining Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Dining Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Place the Chair Seat(A) facedown on the edge of a clean Table Top. Attach Leg Frame(B) to Chair Seat(A) using Bolts(②), Washers(③), and Spring Washers(④) with Allen Key(①) as pictured above. Do not fully tighten the Bolts. Step 2 Stand the Chair up and place on flat, level surface. Carefully and gently sit onto the Chair. This will help properly align all parts at all joints and remove any gaps. Carefully get off the Chair and gently turn it over. Then proceed to tighten all Bolts at all joints.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.