Assembly Instructions

Place the tray(A) onto the end table
as shown.
(1)Connect the side assemblies(B)
together by sliding them into
the rails(C) as shown.
(2)Make sure both ends are pushed
together as tightly as possible
and lock with screws(E).
(3)Slip plastic feet(F) into tubes.
(1)Turn it over.
(2)Peel backing off Non-Slip
disks(G) and place disks on
assembly as shown to support
glass shelves.
(3)Carefully place glasses(D) on
assembly.
step1
step2
step3
B
B
E
C
F
C
D
D
G
A