Quick Start Guide

SYSTEM
Quad-Core Cortex ARM CPU
Mali400 MP2 GPU
2GB RAM
8GB FLASH
Android 8.1 Oreo
NETWORK
Ethernet (built-in)
Wi-Fi 8 02.11 b/g /n
Bluetooth 4.x
Z-Wave+ (500 series, optional)
ZigBee HA (optional)
EnOcean (optional)
433 MHz (optional)
ULE (optional)
3G/4G (cloud connection backup, optional)
DECT
SENSORS
Noise
Light
Humidity
Temperature
Motion
Shock
POWER
Power input: 5VDC
Power supply input: 100-240VAC, 50/60Hz
Power usage: <2W (Idle), 7W (Max.)
Backup battery: Li-Ion 3.7V 3500mAh
POE (Power Over Ethernet, optional)
HVAC power (using C wire, optional)
INPUT/OUTPUT
Touch sensitive 8” screen, 800x1280px
3 programmable scene buttons
4 dry outputs 230VAC, 1A (60 W max)
1 dry input 230VAC
HVAC interface (support for 2-5 wire
thermostat installations, HVAC version only)
RS-485 interface
Security camera with privacy switch
Multi-sound alarm siren, 100 dB @ 10cm
Stereo speakers 2x1W
Microphone
ACCESSORIES
Drill template
Multifuncional power supply
In-wall power supply adapter
Wall mounting bracket and screws
VESA mounting screws
PHYSICAL DIMENSION
7.9 (W) x 7.9 (H) x 0.6 (D) inches
200 (W) x 200 (H) x 15 (D) millimeters
ENVIRONMENTAL
Operating temperature: 0°C to 40°C (32°F to 104°F)
Storage temperature: -25°C to 70°C (-13°F to 158°F)
Humidity: 5% to 95% non-condensing
REGUL ATION
Safety: UL power supply
FCC
CE
RoHS
7.0 | TECHNICAL SPECIFICATION 8.0 | MODEL NUMBERS NOMENCLATURE DESCRIPTION
Model number: zt2_.ABC.D.E.F
Suffix markings from A to F, are place holders for possible variations of main board, casing and modules
types, explained below.
_ - PoE included (if yes=”+”, if no=”blank”)
A - Type of mainboard (general=”g”/HVAC=”h”)
B - housing color (black=”b”/white=”w”)
C - frame color (silver=”s”/gold=”g”)
D - Left radio module (3G/4G, 433, Zigbee=”zbee”, Z-Wave=”zw”)
E - Right radio module (ULE, Zigbee=”zbee”, Z-Wave=”zw”)
F - Socket type (A, C, G)
9.0 | DECLARATION OF CONFORMITY
We, Tri plus grupa d.o.o., Croatia, 10000 Zagreb Banjavciceva 11, declare that the product ZipaTile2 is in compliance
with all the technical regulations applicable to the product within the scope of Council Directives 2014/53/EU.
Sebastian Popovic, CEO
Manufacturer’s Name: Tri plus grupa d.o.o.
Address: Banjavciceva 11, 10000 Zagreb, Croatia
Product name: ZipaTile2
Model number: zt2
Operating temperature: 0°C to 40°C (32°F to 104°F)
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum
separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic
components. Body-worn accessories that do not meet these requirements may not comply with RF exposure
requirements and should be avoided. Use only the supplied or an approved antenna. This device in compliance
with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites
have been carried out.
1. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
D
ISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
2. The product shall only be connected to a USB interface of version USB 2.0
3. Adapter shall be installed near the equipment and shall be easily accessible.
4. The plug considered as disconnect device of the adapter
RF output power: This product can be used across EU member states.