Zipatile Zipatile2 / Alloy Fusion af2c,zt2+,zt2.gbs.zweu.ule,zt2.hbs.zwus.ule Quick-Start Guide v.1.
1.0 | UNPACKING 1.1 | PACKAGING CONTENT THANK YOU FOR BUYING Zipatile2 / Alloy Fusion ZipaTile2 is a multi-functional smart home controller. It can be easily mounted in any home. Featuring a large number of built-in sensors and hardware modules, ZipaTile2 can replace a number of home devices, like security system, thermostat, automation controller, IP camera, alarm siren or intercom, and brings them all together in one smart, beautiful device.
Camera privacy slider 8” screen Siren Security camera VESA mounting holes Light sensor Battery Stereo speakers Reset + Wire release holes Microphone Volume buttons Signal LED Ethernet Power USB Wire terminals SD card (see 3.
2.0 | MOUNTING ZIPATILE2 ON A WALL Risk of Electrical Shock Before performing any electrical work, turn OFF the power to the AC wires leading into the in-wall box at the main power source. Before starting the installation, use a non-contact voltage detector to ensure that there is no power to any wires in the wall box. CAUTION! Installations should be performed in accordance with all national and local electrical codes.
3.0 | WIRING 3.2.1 GENERAL HARDWARE VARIANT 3.1 | POWER OPTIONS S5 S4 RS-485 B O O L2 S2 L1 S1 Normally, use the included power supply and connect the micro-USB connector to the power port of ZipaTile2 unit. If the ZipaTile2 is equipped with PoE module (see section 8.0 | Model numbers nomenclature description), it can also be powered via Ethernet (when connected to PoE enabled switch), and via 24 VAC from HVAC wiring (in this case C (common) wire needs to be connected).
4.0 | POWERING ON YOUR ZIPATILE2 3.2.2 HVAC HARDWARE VARIANT Press and hold (3 sec) the power button on top of the ZipaTile2. Boot process will start with the logo on the screen and it will finish when you see the Zipato login screen. 5.0 | CONNECTING TO THE INTERNET ZipaTile2 has to be connected to the Internet, over the Wi-Fi or Ethernet, to configure it properly. The user needs to open “Android Settings” to connect to the Internet.
6.0 | ZIPATO SMART-HOME APP 6.2 | CREATING THE SYSTEM In order to register and use your Zipatile2 with Zipato, you need to have your own Zipato System. If you don’t have a System already, just go to My Systems and click “+” icon to create a new one. 6.1 | LOG IN/REGISTER Use your account’s username and password to log into Zipato app. If you are not a registered Zipato user, you need to register your user account on Zipato server by pressing “Register” button.
7.0 | TECHNICAL SPECIFICATION SYSTEM Quad-Core Cortex ARM CPU Mali400 MP2 GPU 2GB RAM 8GB FLASH Android 8.1 Oreo NETWORK Ethernet (built-in) Wi-Fi 802.11 b/g/n Bluetooth 4.x Z-Wave+ (500 series, optional) ZigBee HA (optional) EnOcean (optional) 433 MHz (optional) ULE (optional) 3G/4G (cloud connection backup, optional) DECT SENSORS Noise Light Humidity Temperature Motion Shock POWER Power input: 5VDC Power supply input: 100-240VAC, 50/60Hz Power usage: <2W (Idle), 7W (Max.) Backup battery: Li-Ion 3.
10.0 | ONE (1) YEAR LIMITED PRODUCT WARRANTY DISPOSING AND RECYCLING YOUR PRODUCT This symbol on the product or packaging means that according to local laws and regulations needs to be disposed of separately from household waste and sent to recycling because it contains electronic components.
FCC WARNING This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC Caution: - English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. - French: Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
make your home smart www.zipato.
