Installation Guide

803341 - Tap Installation Instructions - 02.17 - v2.02 Page 17 of 20
Special Tools Required:
In addition to normal tools, the following will be required:
• 35mm diameter sheet metal hole punch for sink tops. (Not supplied)
• 35mm diameter hole saw for timber bench tops. (Not supplied)
• 42mm AF tube spanner or wrench (Not supplied) for fixing tap assembly.
6 - Celsius
Tap Installation
Hole positioning:
Position the tap such that it dispenses
into the sink bowl.
NOTE: Taps are available with ARC or CUBE neck options.
35mm hole
Double Bowl