Installation Guide

Page 10 of 28 802149 - BHA; CHA; CSHA -Installation Instructions - 09.2016 - V2.01
Special Tools Required:
In addition to normal tools, the following will be required:
• 35mm diameter sheet metal hole punch for sink tops. (Not supplied)
• 35mm diameter hole saw for timber bench tops. (Not supplied)
• 42mm AF tube spanner or wrench (Not supplied) for fixing tap assembly.
Section 1
Tap Installation
Hole positioning:
Position the tap such that it dispenses
into the sink bowl.
NOTE: Taps are available with ARC or CUBE neck options.
35mm hole
Double Bowl