Installation Guide

802149 - BHA; CHA; CSHA -Installation Instructions - 09.2016 - v2.01 Page 21 of 28
4.4 Model BHA
Installation Instructions
: Not required for standard BHA HydroTap models.
Note:
Note:
All
All
silicon tubes
silicon tubes
must be cut to
must be cut to
size. They must
size. They must
have a constant
have a constant
fall back to the
fall back to the
unit.
unit.
RED
CLEAR
BRAIDED
POWER
CORD
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT BYPASS
OUT
USB
Note:
- Mains hose length is
750mm
- Plug and Cord length is
1800mm
Position the undersink
unit close to the Celsius
tap and according to the
hose and cord lengths
supplied
Note: The Celsius tap requires theTee piece, as supplied, to be fi tted in the cold water supply line, from the
isolation valve (Not supplied), to the mixer tap. (See diagrams)