Technical data

Instantaneous water heater MDH 3..7

Installed together with a standard tap the small instantaneous

water heater MDH turns on as soon as the hot water valve opens in

the tap. Warm water flows immediately in a pleasantly soft stream

for as long as desired. The flow of water depends on the rating of

the heater.

· Mini-sized, hydraulically controlled under-sink instantaneous water

heater to supply a single point of use

· The heating element is activated automatically as soon as water

begins to flow through the unit

· Bare wire technology IES

achieves maximum efficiency plus the

fastest possible heat up time

· Supplied complete with special tap nozzle with integrated flow

regulator for fitting in tap threads M22 / M24 and a connection

set (T-piece and flexible pressure hose

“) for an angle valve

· Performance: MDH 3: 3.5 kW 230 V (approx. 2.0 l / min ∆t 25 K)

MDH 4: 4.4 kW 230 V (approx. 2.5 l / min ∆t 25 K)

MDH 6: 5.7 kW 230 V (approx. 3.3 l / min ∆t 25 K)

MDH 7: 6.5 kW 400 V (approx. 3.7 l / min ∆t 25 K)

· Dimensions (H × W × D): 13 × 18.5 × 8 cm

Efficient, attractive and economic

MDH 3 · MDH 4 · MDH 6 · MDH 7

Efficient and powerful,

and out of sight

In comparison with conven-

tional storage water heaters

it is possible to install the

small instantaneous water

heater below the basin so

that it is as good as invisible

from view.